Facile Chemical Reduction Synthesis of Cu/Cu₂O Nanostructures: From Spherical Nanoparticles to Anisotropic Nanorods
Online First: 11/11/2026
Corressponding author's email:
hangptk@hcmute.edu.vnDOI:
https://doi.org/10.54644/jte.2026.2600Keywords:
Copper nanostructure, Chemical reduction, Core-shell, Localised surface plasmon resonance, Sodium borohydrideAbstract
Copper nanostructures are promising inexpensive substitutes for noble-metal nanomaterials. However, controlling their phase purity and morphology is challenging due to the facile oxidation of metallic copper during synthesis and storage. In this work, the effect of the amount of reducing agent on the phase composition and morphology of the copper nanostructures prepared by chemical reduction was investigated. Four samples (M1–M4) were obtained from CuCl2.2H2O in ethanol with sodium borohydride volumes of 0.2–0.8 mL, with polyvinylpyrrolidone added after the main reduction step as the stabilizer, and characterized by X-ray diffraction, scanning electron microscopy and ultraviolet–visible spectroscopy. The diffraction patterns reveal only the face-centered cubic Cu phase at low reducing agent content a dominant Cu2O phase at high reducing agent content. Electron micrographs reveal the evolution of the morphology from irregular aggregated particles, to the coexistence of spheres and nanorods up to about 1.3 µm long, to agglomerated spheres at the highest content. All the samples exhibit a localized surface plasmon resonance band that red-shifts from ~630–640 nm (M1, M2) to ~650–670 nm (M3, M4), indicating that metallic Cu is retained in all samples, plausibly as a Cu core covered by a Cu2O surface layer. Thus, the amount of reducing agent controls the phase composition and the growth mode, offering a simple route to tune copper nanostructures for catalytic, sensing and conductive-ink applications.
Downloads: 0
References
A. Bratovcic, “Different applications of nanomaterials and their impact on the environment,” SSRG International Journal of Material Science and Engineering, vol. 5, no. 1, pp. 1–7, Jan.–Apr. 2019. DOI: https://doi.org/10.14445/23948884/IJMSE-V5I1P101
V. Pokropivny et al., Introduction to Nanomaterials and Nanotechnology. University of Tartu, 2007.
N. Baig et al., “Nanomaterials: A review of synthesis methods, properties, recent progress, and challenges,” Materials Advances, vol. 2, no. 6, pp. 1821–1871, Jan. 2021, doi: 10.1039/d0ma00807a. DOI: https://doi.org/10.1039/D0MA00807A
L. H. Madkour, “Introduction to nanotechnology (NT) and nanomaterials (NMs),” in Advanced Structured Materials, 2019, pp. 1–47, doi: 10.1007/978-3-030-21621-4_1. DOI: https://doi.org/10.1007/978-3-030-21621-4_1
H. Duan et al., “Recent progress and challenges in plasmonic nanomaterials,” Nanotechnology Reviews, vol. 11, no. 1, pp. 846–873, Jan. 2022, doi: 10.1515/ntrev-2022-0039. DOI: https://doi.org/10.1515/ntrev-2022-0039
T. Wilberforce et al., “Developments of electric cars and fuel cell hydrogen electric cars,” International Journal of Hydrogen Energy, vol. 42, no. 40, pp. 25695–25734, Aug. 2017, doi: 10.1016/j.ijhydene.2017.07.054. DOI: https://doi.org/10.1016/j.ijhydene.2017.07.054
M. Sarno, “Nanotechnology in energy storage: The supercapacitors,” in Studies in Surface Science and Catalysis, 2019, pp. 431–458, doi: 10.1016/B978-0-444-64337-7.00022-7. DOI: https://doi.org/10.1016/B978-0-444-64337-7.00022-7
S. Alagappan, “Role of nanotechnology in smart phone,” Everyman’s Science, vol. 56, nos. 5–6, Jul. 2023, doi: 10.59094/emsj.v56i5-6.70. DOI: https://doi.org/10.59094/emsj.v56i5-6.70
B. Zhang et al., “Recent progress in dielectric/metal/dielectric electrodes for foldable light-emitting devices,” Nanotechnology Reviews, vol. 12, no. 1, 2023, doi: 10.1515/ntrev-2023-0578. DOI: https://doi.org/10.1515/ntrev-2023-0578
A. Haleem et al., “Applications of nanotechnology in medical field: A brief review,” Global Health Journal, vol. 7, no. 2, pp. 70–77, Feb. 2023, doi: 10.1016/j.glohj.2023.02.008. DOI: https://doi.org/10.1016/j.glohj.2023.02.008
S. S. Suri et al., “Nanotechnology-based drug delivery systems,” Journal of Occupational Medicine and Toxicology, vol. 2, no. 1, Art. no. 16, Dec. 2007, doi: 10.1186/1745-6673-2-16. DOI: https://doi.org/10.1186/1745-6673-2-16
O. C. Farokhzad et al., “Impact of nanotechnology on drug delivery,” ACS Nano, vol. 3, no. 1, pp. 16–20, Jan. 2009, doi: 10.1021/nn900002m. DOI: https://doi.org/10.1021/nn900002m
M. Ramesh et al., “Nanotechnology-enabled biosensors: A review of fundamentals, design principles, materials, and applications,” Biosensors, vol. 13, no. 1, Art. no. 40, Dec. 2022, doi: 10.3390/bios13010040. DOI: https://doi.org/10.3390/bios13010040
M. Rizwan et al., “Types and classification of nanomaterials,” in Elsevier eBooks, 2021, pp. 31–54, doi: 10.1016/B978-0-12-823823-3.00001-X. DOI: https://doi.org/10.1016/B978-0-12-823823-3.00001-X
H. Cheng et al., “Syntheses and properties of metal nanomaterials with novel crystal phases,” Advanced Materials, vol. 30, no. 26, Art. no. e1707189, Apr. 2018, doi: 10.1002/adma.201707189. DOI: https://doi.org/10.1002/adma.201707189
E. Roduner, “Size matters: Why nanomaterials are different,” Chemical Society Reviews, vol. 35, no. 7, p. 583, 2006, doi: 10.1039/b502142c. DOI: https://doi.org/10.1039/b502142c
S. Linic et al., “Photochemical transformations on plasmonic metal nanoparticles,” Nature Materials, vol. 14, no. 6, pp. 567–576, May 2015, doi: 10.1038/nmat4281. DOI: https://doi.org/10.1038/nmat4281
H. Daraee et al., “Application of gold nanoparticles in biomedical and drug delivery,” Artificial Cells, Nanomedicine, and Biotechnology, vol. 44, no. 1, pp. 410–422, 2014, doi: 10.3109/21691401.2014.955107. DOI: https://doi.org/10.3109/21691401.2014.955107
X. Luo et al., “Application of nanoparticles in electrochemical sensors and biosensors,” Electroanalysis, vol. 18, no. 4, pp. 319–326, Jan. 2006, doi: 10.1002/elan.200503415. DOI: https://doi.org/10.1002/elan.200503415
H. D. Beyene et al., “Synthesis paradigm and applications of silver nanoparticles (AgNPs): A review,” Sustainable Materials and Technologies, vol. 13, pp. 18–23, Aug. 2017, doi: 10.1016/j.susmat.2017.08.001. DOI: https://doi.org/10.1016/j.susmat.2017.08.001
L. Wei et al., “Silver nanoparticles: Synthesis, properties, and therapeutic applications,” Drug Discovery Today, vol. 20, no. 5, pp. 595–601, 2015, doi: 10.1016/j.drudis.2014.11.014. DOI: https://doi.org/10.1016/j.drudis.2014.11.014
M. Bhagat et al., “Review—Multifunctional copper nanoparticles: Synthesis and applications,” ECS Journal of Solid State Science and Technology, vol. 10, no. 6, Art. no. 063011, Jun. 2021, doi: 10.1149/2162-8777/ac07f8. DOI: https://doi.org/10.1149/2162-8777/ac07f8
S. A. Kumar et al., “Preparation and characterization of copper nanoparticles/zinc oxide composite modified electrode and its application to glucose sensing,” Materials Science and Engineering C, vol. 30, no. 1, pp. 86–91, 2010, doi: 10.1016/j.msec.2009.09.001. DOI: https://doi.org/10.1016/j.msec.2009.09.001
H. Yu et al., “Recent progress of the practical applications of the platinum nanoparticle-based electrochemistry biosensors,” Frontiers in Chemistry, vol. 9, Art. no. 677876, May 2021, doi: 10.3389/fchem.2021.677876. DOI: https://doi.org/10.3389/fchem.2021.677876
A. Marinoiu et al., “One-step synthesis of graphene supported platinum nanoparticles as electrocatalyst for PEM fuel cells,” International Journal of Hydrogen Energy, vol. 46, no. 22, pp. 12242–12253, 2021, doi: 10.1016/j.ijhydene.2020.04.183. DOI: https://doi.org/10.1016/j.ijhydene.2020.04.183
S. M. Kraemer, “Copper,” in Encyclopedia of Earth Sciences Series, pp. 290–291, 2011, doi: 10.1007/978-1-4020-9212-1_61. DOI: https://doi.org/10.1007/978-1-4020-9212-1_61
F. Eker et al., “A comprehensive review of nanoparticles: From classification to application and toxicity,” Molecules, vol. 29, no. 15, Art. no. 3482, Jul. 2024, doi: 10.3390/molecules29153482. DOI: https://doi.org/10.3390/molecules29153482
V. A. K. et al., “Copper conductive inks: Synthesis and utilization in flexible electronics,” RSC Advances, vol. 5, no. 79, pp. 63985–64030, 2015, doi: 10.1039/C5RA08205F. DOI: https://doi.org/10.1039/C5RA08205F
J. M. Zen et al., “Amino acid analysis using disposable copper nanoparticle plated electrodes,” The Analyst, vol. 129, no. 9, p. 841, 2004, doi: 10.1039/b401573h. DOI: https://doi.org/10.1039/b401573h
E. Alzahrani et al., “Synthesis of copper nanoparticles with various sizes and shapes: Application as a superior non-enzymatic sensor and antibacterial agent,” International Journal of Electrochemical Science, vol. 11, no. 6, pp. 4712–4723, May 2016, doi: 10.20964/2016.06.83. DOI: https://doi.org/10.20964/2016.06.83
N. K. Ojha et al., “Copper nanoparticles as inexpensive and efficient catalyst: A valuable contribution in organic synthesis,” Coordination Chemistry Reviews, vol. 353, pp. 1–57, Oct. 2017, doi: 10.1016/j.ccr.2017.10.004. DOI: https://doi.org/10.1016/j.ccr.2017.10.004
P. Han et al., “Copper nanoparticle-incorporated carbon fibers as free-standing anodes for lithium-ion batteries,” Nanoscale Research Letters, vol. 11, no. 1, Art. no. 172, Mar. 2016, doi: 10.1186/s11671-016-1389-6. DOI: https://doi.org/10.1186/s11671-016-1389-6
T. Kruk et al., “Nanocomposite multifunctional polyelectrolyte thin films with copper nanoparticles as the antimicrobial coatings,” Colloids and Surfaces B: Biointerfaces, vol. 181, pp. 112–118, 2019, doi: 10.1016/j.colsurfb.2019.05.014. DOI: https://doi.org/10.1016/j.colsurfb.2019.05.014
M. E. Zowalaty et al., “Synthesis, characterization, and antimicrobial properties of copper nanoparticles,” International Journal of Nanomedicine, vol. 8, p. 4467, Nov. 2013, doi: 10.2147/ijn.s50837. DOI: https://doi.org/10.2147/IJN.S50837
D. Mott et al., “Synthesis of size-controlled and shaped copper nanoparticles,” Langmuir, vol. 23, no. 10, pp. 5740–5745, Apr. 2007, doi: 10.1021/la0635092. DOI: https://doi.org/10.1021/la0635092
J. Wang et al., “Synthesis of copper nanoparticles with controllable crystallinity and their photothermal property,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 626, Art. no. 126970, Jun. 2021, doi: 10.1016/j.colsurfa.2021.126970. DOI: https://doi.org/10.1016/j.colsurfa.2021.126970
S. V. Gudkov et al., “Influence of the concentration of Fe and Cu nanoparticles on the dynamics of the size distribution of nanoparticles,” Frontiers in Physics, vol. 8, Nov. 2020, doi: 10.3389/fphy.2020.622551. DOI: https://doi.org/10.3389/fphy.2020.622551
N. A. Dhas et al., “Synthesis, characterization, and properties of metallic copper nanoparticles,” Chemistry of Materials, vol. 10, no. 5, pp. 1446–1452, Apr. 1998, doi: 10.1021/cm9708269. DOI: https://doi.org/10.1021/cm9708269
N. S. Powar et al., “Cu nanoparticle: Synthesis, characterization, and application,” Chemical Methodologies, vol. 3, no. 4, pp. 457–480, Jul. 2019, doi: 10.22034/chemm.2019.154075.1112.
J. Ramyadevi et al., “Synthesis and antimicrobial activity of copper nanoparticles,” Materials Letters, vol. 71, pp. 114–116, 2012, doi: 10.1016/j.matlet.2011.12.055. DOI: https://doi.org/10.1016/j.matlet.2011.12.055
M. K. Oh et al., “Multiple surface plasmon resonances in silver and copper nanorods,” Journal of Materials Chemistry, vol. 21, no. 47, p. 19069, 2011, doi: 10.1039/c1jm13613e. DOI: https://doi.org/10.1039/c1jm13613e
J. M. J. Santillán et al., “Analysis of the structure, configuration, and sizing of Cu and Cu oxide nanoparticles generated by fs laser ablation of solid target in liquids,” Journal of Applied Physics, vol. 113, no. 13, Apr. 2013, doi: 10.1063/1.4798387. DOI: https://doi.org/10.1063/1.4798387
I. Yaremchuk et al., “Effect of oxidation of copper nanoparticles on absorption spectra of DLC:Cu nanocomposites,” Diamond and Related Materials, vol. 99, Art. no. 107538, Nov. 2019, doi: 10.1016/j.diamond.2019.107538. DOI: https://doi.org/10.1016/j.diamond.2019.107538
R. Borah and S. W. Verbruggen, “Effect of size distribution, skewness, and roughness on the optical properties of colloidal plasmonic nanoparticles,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 640, Art. no. 128521, Feb. 2022, doi: 10.1016/j.colsurfa.2022.128521. DOI: https://doi.org/10.1016/j.colsurfa.2022.128521
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2026 Journal of Technical Education Science
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright © JTE.
